Features
1.Dual Temperature Display
The device can display two independent temperature readings simultaneously.
Indoor Temperature: The temperature of the environment in which the device is located is measured by the built-in sensor of the device.
External Temperature: Measure the temperature of another location (such as a refrigerator, outdoors, baby's room, fermenter, etc.) through a connected external probe.
This allows users to easily compare the temperatures of two different areas without moving their devices back and forth.
2.Large Screen Digital Display
Adopting large-sized, high contrast LCD or LED screens.
The digital font is huge and clear, making it easy to read even from a certain distance or in low light environments.
Usually equipped with backlight function, convenient for viewing at night.
3.External Probe
Equipped with a precision temperature sensor probe with a long connecting wire.
Users can place the probe in any location that requires monitoring but is not convenient for placing the host (such as outdoors, barbecue grills, fish tanks, air conditioning vents).
Probe cables usually have a certain degree of heat resistance or waterproofing to adapt to different environments.
4.Electronic Hygrometer
In addition to temperature, the device can also accurately measure and display the relative humidity (% RH) of the current environment.
Humidity data is crucial for human comfort, preventing furniture from mold, protecting musical instruments, and warehouse management.
High precision and fast response
Using electronic sensors, the measurement results are more accurate than traditional pointer thermometers.
React quickly to changes in the environment and temperature, and can update readings in a timely manner.
5.Function Test
1.Press MAX / MIN key once to display the previous maximum / minimum indoor and outdoor temperature and humidity values;
2.When the MAX / MIN press the RESET button once to clear a previously memorized maximum or minimum Remeasure
3.When the MAX / MIN 8 seconds after the display returns to the current temperature and humidity display ℃ /℉ key Celsius and Fahrenheit Conversion
6.Time Debugging
1.ln the initial state, press and hold [MODE] for2 seconds, the number of minutes the current time starts flashing, press the [ADJ] to adjust the hours, minutes. In normal time display mode, press the [ADJ] can be converted to 12/24 show.
2.ln the current clock mode (clock and minutes between two blink once per second), press [MODE] once, switch the display to alarm mode (clock and minutes between two points is not flashing), press live [MODE] for 2 seconds, the alarm
time flashes, press the [ADJ] can adjust the alarm time, minute. Alarm mode is displayed, press [ADJ] to set / cancel the alarm alarm function. After setting press the [MODE] returns to normal time display.
